We offer a wide range of powder coatings from manufacturers such as Cromadex, Akzo Nobel, H.Marcel Guest, Inver UK, Trimite and Paramount including polyester, epoxy/polyester and epoxy finishes.
Powder paints are applied electrostatically and cured at temperatures of 160°C and above in an oven and can, therefore, only be applied in-house and not on-site.
Weather and UV resistant polyester powder coatings are designed for external use where UV stability and weather resistance is required.
Typical examples include architectural steelwork, fascia signs and cladding, window and shopfitting systems as well as gates and railings. Powders are available in a wide range of colours and gloss levels and can be custom matched to the client’s requirements.
Epoxy polyester powder coatings are ideal for general indoor use and other applications where high UV stability is not required.
A high performance product recommended for use where good chemical and detergent resistance is needed. Excellent decorative appearance and ease of application together with the advantage of good colour stability.
Recommended for use on interior fittings where good flow, toughness, extra resistance to chemicals or flexibility is essential.
Controlled particle size promotes high charge acceptance and transfer efficiency.
A Performance Polymer Alloy Coating specifically designed to provide a long-lasting tough coating for a wide variety of exterior applications to mild steel, galvanised steel and aluminium.
Warm to Touch has been developed to comply with UK Building Regulations which state that handrails need to be ‘slip-resistant and not cold to the touch.’
Unlike traditional coatings, the Warm to Touch chemical make up is such that it is an excellent thermal insulator feeling ‘warm to touch’, even in winter. Whilst smooth and glossy, the Warm to Touch finish is slip-resistant. Environmentally friendly, Warm to Touch is available in a wide range of colours and finishes.
Salt Spray:
ASTM B117. More than 500 hours with creepage of corrosion less than 2mm from scribe mark.
Humidity:
BS 3900: Part F2: 1973. More than 1000 hours without any effect.
Florida Test:
White powder coated panels showed the following decrease in gloss during Florida exposure:
Time (Mths) 0 3 6 9 12 | Gloss 60° 9385858278
These values refer to a gloss level of unwashed panels exposed 5° south.